What you need to run this:
- Licensed Touch Portal app from Google Play (Touch Portal Pro).
- The Touch Portal software on your PC. https://www.touch-portal.com/
- Install the latest version of the MSFS Touch Portal plug-in. https://github.com/mpaperno/MSFSTouchPortalPlugin/
- Install the latest version of the WASM module. https://github.com/mpaperno/MSFSTouchPortalPlugin/
Buttons for:
Gear - Flaps - Timer - Speed Brake - Tailhook - Anti Skid - Parking Brake - Batteries - Generators - ATC - GPS - Trims - Sim Speed - Air Refuel - Fuel Dump - Zoom In - Zoom out - ATC 1 till 0 - Auto Pilot: Heading Hold +1 Degree or +10 Degrees, Altitude Hold +100Ft, Vertical Speed +100Ft, Navigation, Localizer, Leveler and Indicated Airspeed - Com1&2 Switch - Vor1&2 Switch - Selector Knob for Com1, Com2, Nav1, Nav2 and NDB - + for Mhz & Khz - Pitot Heat - Engine De-ice - Set Altimeter & Heading - Lightswitches: Landing Gear, Navigation, Taxi, Recognition, Strobes, Beacon, Instruments.
Readouts:
Speed - Mach - Heading - Altitude - Vertical Speed - Wind Direction - Wind Speed - Outside Temp - Barometer - VOR1/ILS Radial, Distance & Name - VOR2/ILS Radial, Distance & Name, NDB Bearing & Name - Warning Panel - Auto Pilot Settings for Heading, Altitude & Vertical Speed - Fuel Status Left & Right - Callsign - Aircraft Flown - Time - Date - Timer - Com1 Freq - Com2 Freq - NAV1 Freq - Nav2 Freq - NDB Freq - Stall Warning - Angle of Attack - Pitch - Roll - Trim Elevator - Trim Ailerons - Simulation Speed
The Warning Panel works only with everything OFF => Lights, Batteries, Generators, Anti-ice Devices, Anti-Skid, Air Brake, Hook up. Only Parking Brake Should be ON then push on "PUSH FOR GND TEST". Once started or in the air do not test again or everything is set back to zero in Touch Portal (not in MSFS).
Only tested with Android devices.
Questions are answered within a week (don't have much time :-)
