Hello Aviators,
This is my first Spadnext profile for the FSS FlightSim Studio E-Jets 190/195 (MSFS2020) compatible with:
Multi Panel (95% Done)
Pro Switch Panel (95% Done)
Radio Panel (100%Done)
TCA Throttle (50% Done)
Feeback
Please fell free to comment anything about the profile, erros, improvements. I will answer all comments.
HOW TO INSTALL:
1. Just extract files from the rar. archive and drop in your documents profile spadnext folder. (...\Documents\SPAD.neXt\profiles)
2. Click activate profile on spad next.
The profile is not yet 100% finished (about 90% done), but it is already functional for flying.
If you find some erros, please tell me down in the comment area.
PANELS DESCRIPTION:
Multi Panel:
- The AP System nothing to tell, really intuitive. HDG, NAV, IAS, ALT and VS works perfect.
- Auto Throttle Switch = Seats Bellts ON/OFF
- Flaps UP/DOWN = HUD (Enhanced flight vision system) UP/DOWN
- Pitch Trim = Pitch Trim
Pro Switch Panel:
- Master BAT = Battery
- Master ALT = APU
- Fuel Pump = HYD Pump
- DE-ICE = DE-ICE Overhead Switch
- Lights Panel = Dome Light Switch
- Beacon = Beacon and Sterile Switch
- NAV = NAV, Logo, Passenger Emergency and No Smoking Switch
- Strobe = Strobe Switch
- Taxi = Taxi Nose and Taxi Side Switch
- Landing = Landing Left, Right and Nose Switch
- Landing Gear Lights = Green Down, Red Retract
- Gear Switch = Gear UP/DOWN
Radio Panel:
- Upper Section for COM1, COM2, NAV1, NAV2, ADF and DME works perfect.
- Lower Section for QNH (Left Display) and XPDR (Right Display).
Important: You need to put the second Switch on XPDR mode.
- On Lower Section if you Press Short ACT/SBTY button, QNH display show IN or HPA. The little roulette for increase/decrease QNH.
- On Lower Section if you Press Long ACT/SBTY button you can change uniit from the right display and with the big roulette you can put your transponder.
TCA Throttle:
- ENG 1 Switch UP = Start ENG 1
- ENG 1 Switch Down = Turn Off ENG 1
- ENG 2 Switch UP = Start ENG 2
- ENG 2 Switch Down = Turn Off ENG 2
- Button under ENG 1 Switch = TO CONFIG
- Button under ENG 2 Switch = GPU in use
- Auto BRK = RTO, OFF, 1, 2, and 3
Thank you in advance for your help. Time to fly and enjoy it!
15 days ago
lisawindy907
24 days ago
sarausa
2 months ago
22 days ago
duffzeth
Erlor